Blog:

Florecent lighting questions

Saturday, December 22, 2007

I was wondering if you can turn a 3 bulb light that once ran off of 2 277 ballests into a 3 bulb that runs off of 1 120?

I have a ballest that will do it i just dont know how to run the wires from the ballest to the lights.

does each pole on the bulb need to be connected to a wire or will one wire do? another questions is i have 1 blue and 1 yellow wire from the left side the blue is on the bottom but a white wire connects it to the top and the yellow stands alone in the center. 2 blues 1 red and 1 orange from the right. the blues are on the top and bottom and the orange and red are attached to the center. not to sure how to convert it but i think its doable. any help would be nice :) thanks

0 Comments | Post Feedback

Feedback:

Post Feedback:

You need to be a registered ThriftyFun user post feedback. If you are registered, login using the form at the top of this page. Click here to register.

Author:

Pasco Handyman (Contact)

Navigation:

Blog Home
RSS Feed
Photo Album

Categories:

Repair

Archive:

December 2007

Disclaimer: MyFrugalLife.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. MyFrugalLife.com has no control of how you may use information you get from this site and does not attest to the validity of any information found within. Much of this information comes from third parties (newsletter readers and other contributers). Use advice found in our newsletters and on our site with common sense and at your own risk. If you see something in our newsletters or on our site that you disagree with, please let us know. Our goal is print only valuable information and advice. If you find any information on MyFrugalLife.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.